Shop

Welcome to Swift Automation Stores

Z-LINK1-LO

Call for Price

SENECA 869 Mhz Radiomodem with RS232/RS485 interface and LoRa radio communication

Z-LINK1-LO is a 869 MHz radio device designed for remote communication operating in a transparent way with ModBUS RTU protocol and exploiting the physical layer of LoRa (Long Range) transmission technology. Based on a UHF radio modem, Z-LINK1-LO enables communication between SENECA Z-PC Line I/O modules and generic ModBUS devices. Z-LINK1-LO stands for make easier cabling of power and serial bus communication mounted in IEC 60715 DIN rail. The module is easily configured throgh DIP-switches or PC software EASY SETUP. It also includes 2 serial ports (1 RS232, 1 RS485) and an isolation stage between communication and power up to 1.500 V. Compliant with ETSI standards and AES128 data encryption, Z-LINK1-LO can operate in remote I/O or bridge operating modes with point-to-point and point-to-multipoint communication mode. LoRa technology allows the radio modem to achieve high coverage (up to 1 km with external antenna), 40 mW transmission power, highest noise immunity and sensitivity.
ANT-LINK1-MG antenna is not a mandatory accessory but is strongly recommended for better signal quality.

Description

ORDER CODE: Z-LINK1-LO
DESCRIPTION: 869 Mhz Radiomodem with RS232/RS485 interface and LoRa radio communication
BANDWIDTH: 869.4 – 869.650 MHz
INTERFACE: RS232/RS485
COMMUNICATION MODE: Half-Duplex
PROTOCOL: ModBUS RTU
RANGE TRANSMISSION: up to 1.000 m (with PER<10 @ 9600 baud, in free field conditions, with antenna accessory ANT-LINK1-MG placed over 2 m from the ground level)
DELAY BETWEEN POLLS: > 250 ms
IRRADIATED POWER: 40 mW
TRANSMISSION DATA SPEED: 1.200..115.200 bps

Additional information

Weight 0.16 kg

Download

DataSheet – Z-LINK1-LO

Swift Automation Sdn Bhd | Z-LINK1-LO